Shenzhen Usafe Intelligent Technology Co., Ltd

                                         Shenzhen Usafe Intelligent Technology Co., Ltd          粤ICP备11065584号

Tel.: +86-755-28286305             Web : www.szusafe.com   www.cnusafe.com
Fax: +86-755-28289702              szusafe.en.alibaba.com                    

E-mail: info@szusafe.com           szusafe.manufacturer.globalsources.com      

Address:5/F, Bldg. 3, Baolaite Industrial Park, No.24 Xinbu Road, Tongle, Longgang District,Shenzhen, China

>
PRODUCTS
Product Name

Fire Alarm Control Panel

Description
Conventional Fire Alarm Control Panel, 2-18 Zones
Model No.
YA-CP100 18
没有此类产品
Features
Product parameters

 Features 

External (key-switch operated):

  • Reset/resound/test zone lamps evacuate
  • Silence alarm sounders
  • Silence fault sounders

Internal:

  • One man detector test
  • Zone isolate
  • Revert to short-circuit: fire (no resistors in call points)

External indicators:

  • Sounder fault
  • Battery/power supply fault
  • Mains on
  • Zone fire
  • Zone fault

Internal indicators:

  • Open circuit zone fault
  • Short circuit zone fault
  • Zone isolated
  • Engineer test selected

Outputs:

  • Two sounder circuits (alarm relay contacts can be obtained by connecting a relay to a sounder circuit)

Ancillary connections for expansion modules will allow the following:

  • Repeater panels
  • Multiple sounder outputs
  • Connection to landlord panel

 

 Specifications 

 

 2 (0.8A SUPPLY)

 4 / 6 (1.5A SUPPLY)

8/10/12/14/16/18

(4.0A SUPPLY)

POWER SPECIFICATION

MAINS SUPPLY VOLTAGE

230V±10%Va.c.50/60Hz

230V±10%Va.c.50/60Hz

230V±10%Va.c.50/60Hz

INTERNAL POWER SUPPLY

27 Vd.c.

27 Vd.c.

27 Vd.c.

TOTAL OUTPUT CURRENT LIMITED TO

800mA@240VAC

1500mA@240VAC

4000mA@240VAC

AUXILIARY POWER OUTPUT

27 Vd.c.

27 Vd.c.

27 Vd.c.

MAINS SUPPLY MONITORED FOR FAILURE

YES

YES

YES

BATTERY CHARGER MONITORED FOR FAILURE

YES

YES

YES

BATTERIES MONITORED FOR DISCONNECTION AND FAILURE

YES

YES

YES

DETECTOR CIRCUIT SPECIFICATION

NUMBER OF CIRCUITS

2

4 or 6

8, 10, 12, 14,16,or 18

LINE FAULT MONITORED FOR OPEN CIRCUIT

YES

YES

YES

LINE FAULT MONITORED FOR SHORT CIRCUIT

YES (Can be disabled)

YES (Can be disabled)

YES (Can be disabled)

LINE FAULT MONITORED FOR DETECTOR REMOVAL

Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor

END OF LINE RESISTOR (SUPPLIED) VALUE

6800,5% tolerance,0.25W

6800,5% tolerance,0.25W

6800,5% tolerance,0.25W

DETECTOR CONTINUITY DIODES

Silicon 1N4001 or Schottky type(required if End of Line Monitor Unit fitted to give Detector Removal Fault)

CALL POINT RESISTOR VALUE (NOT SUPPLIED)

470 to 680, 0.5W

470 to 680, 0.5W

470 to 680, 0.5W

MAXIMUM NUMBER OF SMOKE DETECTORS PER ZONE

20(maximum detector current = 2mA)  

20(maximum detector current = 2mA)  

20(maximum detector current = 2mA)  

MAXIMUM NUMBER OF MANUAL  CALL POINTS PER ZONE

No limit

No limit

No limit

SOUNDER CIRCUIT SPECIFICATION

NUMBER OF CIRCUITS

2

2

2

END OF LINE RESISTOR VALUE

6800, 5%tolerance,0.25W

6800, 5%tolerance,0.25W

6800, 5%tolerance,0.25W

LINE FAULT MONITORED  FOR OPEN CIRCUIT

YES

YES

YES

LINE FAULT MONITORED FOR SHORT CIRCUIT

YES

YES

YES

OUTPUTS FUSED AT

1 Amp

1 Amp

1.6 Amp

MAXIMUM TOTAL OUTPUT CURRENT ALL OUTPUTS

800mA

1500mA

4000mA

MAXIMUM NO OF BELLS @ 25 mA EACH BELL

32

56

120

MAXIMUM NO OF ELECTRONIC SOUNDERS @ 20 mA

40

70

150

AUXILIARY RELAY CONTACTS  (DO NOT CONNECT MAINS VOLTAGES)

1A 30 Vd.c. max  Voltage Free

1A 31 Vd.c. max  Voltage Free

1A 32 Vd.c. max  Voltage Free

FUSES-ALL FUSES COMPLIANT TO IEC (EN60127 PT2)

MAINS TERMINAL BLOCK

200mA T 20 mm

400mA T 20mm

630mA T 20mm

SOUNDER OUTPUTS

1A F 20mm

1A F 20mm

1.6A F 20mm

AUXILIARY OUTPUT

1A F 20mm

1A F 20mm

1A F 20mm

BATTERY FUSE

1.6A F 20mm

1.6A F 20mm

3A F 20mm

DOOR RETAINING MAGNETS

DO NOT USE PANEL POWER SUPPLY AS YOU WILL DRASTICALLY REDUCE BATTERY STAND-BY TIME

CONNECTION BLOCK

LARGEST ACCEPTABLE CONDUCTOR SIZE

2.5mm2

2.5mm2

2.5mm2

SMALLEST ACCEPTABLE CONDUCTOR SIZE

0.75mm2

0.75mm2

0.75mm2

DIMENSIONS

ENCLOSURE(WIDTH x HEIGHT x DEPTH)

415 x 265 x 100mm

415 x 265 x 100mm

415 x 265 x 100mm

WEIGHT(WITHOUT BATTERIES)

5100g

5200g

5500g

 

 

 

Technical Specification
Input Voltage:
Static Current:
Alarm Current:
Operating Humidity:
Operating Temperature:
Alarm Reset:
LED Indication:
Installation:
Detecting Area:
Detecting Sensitivity:
Dimension:
1:
1:
暂未实现,敬请期待
暂未实现,敬请期待
Next article