Product Name: YA-CP100

Model No.:

Description Parameters

Features

External (key-switch operated):

Reset/resound/test zone lamps evacuate
Silence alarm sounders
Silence fault sounders

Internal:

One man detector test
Zone isolate
Revert to short-circuit: fire (no resistors in call points)

External indicators:

Sounder fault
Battery/power supply fault
Mains on
Zone fire
Zone fault

Internal indicators:

Open circuit zone fault
Short circuit zone fault
Zone isolated
Engineer test selected

Outputs:

Two sounder circuits (alarm relay contacts can be obtained by connecting a relay to a sounder circuit)

Ancillary connections for expansion modules will allow the following:

Repeater panels
Multiple sounder outputs
Connection to landlord panel

Specifications

	2 (0.8A SUPPLY)	4 / 6 (1.5A SUPPLY)	8/10/12/14/16/18 (4.0A SUPPLY)
POWER SPECIFICATION
MAINS SUPPLY VOLTAGE	230V±10%Va.c.50/60Hz	230V±10%Va.c.50/60Hz	230V±10%Va.c.50/60Hz
INTERNAL POWER SUPPLY	27 Vd.c.	27 Vd.c.	27 Vd.c.
TOTAL OUTPUT CURRENT LIMITED TO	800mA@240VAC	1500mA@240VAC	4000mA@240VAC
AUXILIARY POWER OUTPUT	27 Vd.c.	27 Vd.c.	27 Vd.c.
MAINS SUPPLY MONITORED FOR FAILURE	YES	YES	YES
BATTERY CHARGER MONITORED FOR FAILURE	YES	YES	YES
BATTERIES MONITORED FOR DISCONNECTION AND FAILURE	YES	YES	YES
DETECTOR CIRCUIT SPECIFICATION
NUMBER OF CIRCUITS	2	4 or 6	8, 10, 12, 14,16,or 18
LINE FAULT MONITORED FOR OPEN CIRCUIT	YES	YES	YES
LINE FAULT MONITORED FOR SHORT CIRCUIT	YES (Can be disabled)	YES (Can be disabled)	YES (Can be disabled)
LINE FAULT MONITORED FOR DETECTOR REMOVAL	Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
END OF LINE RESISTOR (SUPPLIED) VALUE	6800Ω,5% tolerance,0.25W	6800Ω,5% tolerance,0.25W	6800Ω,5% tolerance,0.25W
DETECTOR CONTINUITY DIODES	Silicon 1N4001 or Schottky type(required if End of Line Monitor Unit fitted to give Detector Removal Fault)
CALL POINT RESISTOR VALUE (NOT SUPPLIED)	470 to 680Ω, 0.5W	470 to 680Ω, 0.5W	470 to 680Ω, 0.5W
MAXIMUM NUMBER OF SMOKE DETECTORS PER ZONE	20(maximum detector current = 2mA)	20(maximum detector current = 2mA)	20(maximum detector current = 2mA)
MAXIMUM NUMBER OF MANUAL CALL POINTS PER ZONE	No limit	No limit	No limit
SOUNDER CIRCUIT SPECIFICATION
NUMBER OF CIRCUITS	2	2	2
END OF LINE RESISTOR VALUE	6800Ω, 5%tolerance,0.25W	6800Ω, 5%tolerance,0.25W	6800Ω, 5%tolerance,0.25W
LINE FAULT MONITORED FOR OPEN CIRCUIT	YES	YES	YES
LINE FAULT MONITORED FOR SHORT CIRCUIT	YES	YES	YES
OUTPUTS FUSED AT	1 Amp	1 Amp	1.6 Amp
MAXIMUM TOTAL OUTPUT CURRENT ALL OUTPUTS	800mA	1500mA	4000mA
MAXIMUM NO OF BELLS @ 25 mA EACH BELL	32	56	120
MAXIMUM NO OF ELECTRONIC SOUNDERS @ 20 mA	40	70	150
AUXILIARY RELAY CONTACTS (DO NOT CONNECT MAINS VOLTAGES)	1A 30 Vd.c. max Voltage Free	1A 31 Vd.c. max Voltage Free	1A 32 Vd.c. max Voltage Free
FUSES-ALL FUSES COMPLIANT TO IEC (EN60127 PT2)
MAINS TERMINAL BLOCK	200mA T 20 mm	400mA T 20mm	630mA T 20mm
SOUNDER OUTPUTS	1A F 20mm	1A F 20mm	1.6A F 20mm
AUXILIARY OUTPUT	1A F 20mm	1A F 20mm	1A F 20mm
BATTERY FUSE	1.6A F 20mm	1.6A F 20mm	3A F 20mm
DOOR RETAINING MAGNETS	DO NOT USE PANEL POWER SUPPLY AS YOU WILL DRASTICALLY REDUCE BATTERY STAND-BY TIME
CONNECTION BLOCK
LARGEST ACCEPTABLE CONDUCTOR SIZE	2.5mm²	2.5mm²	2.5mm²
SMALLEST ACCEPTABLE CONDUCTOR SIZE	0.75mm²	0.75mm²	0.75mm²
DIMENSIONS
ENCLOSURE(WIDTH x HEIGHT x DEPTH)	415 x 265 x 100mm	415 x 265 x 100mm	415 x 265 x 100mm
WEIGHT(WITHOUT BATTERIES)	5100g	5200g	5500g